Description

Nuprol V2 Tappet Plate – Reliable Feeding & Gearbox Timing

The tappet plate is the unsung hero of your gearbox – responsible for the precise back-and-forth movement of your air nozzle – If your RIF has suddenly stopped feeding BBs or is “dry firing” despite a full magazine – a snapped or worn tappet plate is often the culprit – This Nuprol V2 Tappet Plate is a reinforced – high-density polymer component designed to restore perfect timing to your Version 2 gearbox – ensuring every shot is loaded reliably – even during high rates of fire –

Key Features & Performance

• High-Flex Polymer Construction – Engineered to withstand the constant high-speed reciprocating stress without snapping or deforming over time –
• Precision Moulding – Designed for a smooth – low-friction slide within the gearbox shells – reducing drag on your sector gear –
• V2 Specification – A direct “drop-in” fit for standard Version 2 gearboxes found in M4 – M16 – MP5 – and G3 platforms –
• Reinforced Stress Points – Extra material around the “fin” area where the sector gear nub makes contact – preventing the most common cause of internal failure –
• Bright Visual ID – Finished in a distinct colour making it easy to inspect for wear or timing issues during maintenance –

The Pro Take

When we are teching RIFs – we look for parts that offer a balance between rigidity and flexibility – A tappet plate that is too brittle will snap under the pressure of a high-speed build – while one that is too soft will bend and cause feeding skips – Nuprol has hit the “goldilocks” zone with this one – It is an essential spare to keep in your kit bag – especially if you run a high-ROF (Rate of Fire) setup where the tappet plate is working double-time to keep up with the gears –

UK Spec & Site Performance

In the UK – most woodland sites limit AEGs to 350 FPS – which usually means a standard spring and gear set – However – many UK players are now moving toward 11.1v LiPo batteries for better trigger response in CQB – This puts significantly more strain on your internal timing – The Nuprol V2 Tappet Plate is built to handle the increased cycle speeds common in modern UK builds – ensuring you don’t suffer a mid-game breakdown during a critical push at a site like The Mall or a muddy Sunday at a local woodland skirmish – It is fully compatible with all UKARA-standard M4 variants – from budget-friendly rentals to high-end custom builds –

Friendly FAQ

Will this fit my M4 or AR-15 style airsoft gun?

Yes – almost all M4 – M16 – and HK416 style AEGs use a Version 2 gearbox – making this tappet plate a standard fit for those platforms –

Does this include the tappet spring?

This is the tappet plate only – We always recommend checking your existing spring for tension when you replace the plate – as a weak spring can also cause feeding issues –

Do I need to modify this to fit my gearbox?

In most standard V2 gearboxes – this is a straight swap – However – if you are using a very specific high-speed sector gear – you may need to “trim” the fin slightly – which is standard practice for advanced airsoft teching –

Is it hard to install?

Installing a tappet plate requires opening the gearbox – which is an intermediate-level tech task – If you are comfortable taking your gearbox apart – it is a simple part to seat into the tracks –