Description
Control the Spread: KRYTAC KT40 40mm MOSCART Gas Grenade Shell
Give your 40mm launcher a serious upgrade with the KRYTAC KT40 40mm MOSCART Gas Grenade Shell. Designed for players who want more control over their BB spread, the KT40 combines a high-capacity 175-round load with an innovative adjustable choke system, allowing you to change the way the BBs leave the shell to suit different engagement distances.
Built from aluminium alloy and based on technology developed from the Airsoft Innovations 40 Mike design, the KT40 is designed to offer a more refined alternative to conventional MOSCART shells. Whether you want a broad spread for close-range engagements or a tighter pattern for reaching targets further away, the adjustable choke gives you another level of control over your 40mm launcher setup.
Technical Specifications
| Specification | Details |
|---|---|
| Product Type | 40mm MOSCART Gas Grenade Shell |
| Capacity | Approx. 175 x 6mm BBs |
| Construction | Aluminium Alloy |
| Gas | Green Gas / Standard Gas |
| Velocity | Approx. 175 FPS with 0.20g BBs |
| Choke System | Adjustable spread control |
| Compatibility | Standard 40mm MOSCART Launchers |
| Included | KRYTAC KT40 Shell & Safety Cap |
IMPORTANT GAS WARNING – PLEASE READ
USE GREEN GAS / STANDARD GAS ONLY.
DO NOT USE CO2, HPA, RED GAS, BLACK GAS OR OTHER HIGH-PRESSURE GASES WITH THE KRYTAC KT40.
Using gas at pressures outside the KT40’s intended operating parameters may cause damage to the shell, seals or internal components and can result in unsafe operation.
Key Features & Performance
- 175-Round Capacity: Load approximately 175 polymer 6mm BBs into a single shell for a substantial spread with every shot.
- Adjustable Choke System: Change the BB dispersion pattern to create a wider spread for close-range use or a tighter pattern when engaging targets further away.
- Aluminium Alloy Construction: The lightweight metal construction provides a robust shell designed for repeated use on the skirmish field.
- 40mm MOSCART Compatibility: Designed for use with a wide range of standard 40mm MOSCART launchers, including M203, AG36 and EGLM-style systems.
- Speedloader Friendly: The large BB capacity makes a speedloader the practical way to load the shell efficiently.
- Safety Cap Included: The supplied cap helps protect the firing valve and reduces the risk of accidental activation while the shell is being carried.
- Green Gas Powered: Designed specifically around standard green gas operation rather than high-pressure gas systems.
- Airsoft BBs Only: The KT40 is designed for polymer 6mm Airsoft BBs and should not be loaded with alternative projectiles or unconventional ammunition.
The “Pro” Take
The standout feature of the KT40 isn’t simply its 175-round capacity – it’s the ability to control how those BBs are distributed. Traditional MOSCART shells generally give you one fixed spread pattern, whereas the KT40 lets you tune the choke to suit the engagement.
That makes the KT40 particularly interesting for players who use their 40mm launcher across different environments. A wider spread can help when clearing tight areas, while a tighter setting can concentrate the BBs when you need more reach. It gives the grenadier a useful degree of control without needing to carry multiple types of shell.
UK Airsoft Use
The KT40 is designed for use with standard green gas, making it straightforward to integrate into a conventional gas-powered MOSCART setup. Always fill the shell in a safe location while wearing appropriate eye protection, and keep the launcher pointed in a safe direction during loading and handling.
Remember that 40mm launcher rules and engagement distances can vary considerably between UK airsoft sites. Always check the rules of the site you are attending before using a MOSCART shell, particularly when it comes to minimum engagement distances and the use of 40mm launchers.
Loading & Maintenance
The KT40 uses a top-mounted gas fill valve and BB loading port. When filling the shell, place it on its base and invert the gas canister as you would with a conventional green gas magazine. It is recommended to fill the gas before loading the BBs, with eye protection worn throughout the process.
With approximately 175 BBs to load, a speedloader is strongly recommended. Regular maintenance and appropriate lubrication of the shell’s seals will also help maintain reliable operation over time. Never attempt to modify the gas system or use a higher-pressure gas source.
Friendly FAQ
Q: How many BBs does the KT40 hold?
A: The KT40 holds approximately 175 polymer 6mm Airsoft BBs.
Q: What makes the KT40 different from a standard MOSCART shell?
A: The main difference is its adjustable choke system. This allows you to alter the BB spread rather than being locked into a single dispersion pattern.
Q: What gas should I use?
A: Use standard green gas only. Do not use CO2, HPA, red gas, black gas or other high-pressure gases with the KT40.
Q: Can I use the KT40 in any 40mm launcher?
A: The KT40 is designed for broad compatibility with standard 40mm MOSCART launchers. However, launcher designs can vary, so we recommend checking compatibility if you are using a less common or proprietary launcher system.
Q: What BBs can I use?
A: The KT40 is designed specifically for polymer 6mm Airsoft BBs. Do not use metal BBs, projectiles or unconventional ammunition.
Q: Does the KT40 come with a safety cap?
A: Yes. A safety cap is included and should be used when the shell is being transported or stored.
Q: How should I load the KT40?
A: Fill the shell with green gas first, then load the BBs using a speedloader. Always wear eye protection during the filling and loading process and keep the front of the shell pointed in a safe direction.
Reviews
There are no reviews yet.